Pillow Block Bearings

Contact Now

Pillow blocks are supplied in a variety of configurations. Pressed steel pillow block bearings are also available for light-duty applications. Check out our selection of high quality pillow block bearings listed below. We are always updating and adding sizes and styles. So be sure to refer to this page often. A pillow block bearing consists of a mounting bracket (pillow block) that houses a bearing and is used in low-torque, light load applications. With this configuration, the pillow block is bolted to a foundation, securing it, while the shaft and the inner ring of the bearing are free to rotate.

A Pillow Block Bearing is a mounted anti-friction bearing that is contained within a solid cast iron, ductile iron or cast steel housing unit. Also referred to as a housed bearing unit, meaning they are self-contained, greased, sealed and ready for installation on the equipment.

Bearing Number	Bore Dia	Outer DIa	Width	Size
0.75 Inch \| 19.05 Millimeter x 1.219 Inch \| 30.963 Millimeter x 1.313 Inch \| 33.35 Millimeter BROWNING VPS-212 Pillow Block Bearings	1.63 in	0.083 in	0.0030 in	4 in
0.75 Inch \| 19.05 Millimeter x 1.719 Inch \| 43.663 Millimeter x 1.25 Inch \| 31.75 Millimeter BROWNING VPLE-212 Pillow Block Bearings	Single	698	Clear Anodize	6
0.75 Inch \| 19.05 Millimeter x 1.219 Inch \| 30.963 Millimeter x 1.313 Inch \| 33.35 Millimeter BROWNING VPS-212 AH Pillow Block Bearings	0.130 in	2.1250 in	0.3	3.82 in
1.438 Inch \| 36.525 Millimeter x 1.688 Inch \| 42.87 Millimeter x 1.813 Inch \| 46.05 Millimeter BROWNING VPLS-223 Pillow Block Bearings	13	0 in	1.81 in	2.14
1.938 Inch \| 49.225 Millimeter x 2.469 Inch \| 62.7 Millimeter x 2.25 Inch \| 57.15 Millimeter BROWNING VPE-231 Pillow Block Bearings	Round Type	64	VV (Non-Contact Rubb	Available
1.75 Inch \| 44.45 Millimeter x 1.937 Inch \| 49.2 Millimeter x 2.125 Inch \| 53.98 Millimeter IPTCI UCPA 209 28 L3 Pillow Block Bearings	T-Shaped	53	Height Configurable	[Steel] Steel
1.438 Inch \| 36.525 Millimeter x 2.012 Inch \| 51.1 Millimeter x 1.875 Inch \| 47.63 Millimeter IPTCI NAPA 207 23 L3 Pillow Block Bearings	244.475 mm	23200 lbf	Stamped Steel	141000 lbf
2.5 Inch \| 63.5 Millimeter x 2.937 Inch \| 74.6 Millimeter x 3 Inch \| 76.2 Millimeter IPTCI UCPX 13 40 L3 Pillow Block Bearings	1740 rpm	Light Series	2 x M30	Two-Bolt Plummer Blo
0.75 Inch \| 19.05 Millimeter x 1.713 Inch \| 43.5 Millimeter x 1.25 Inch \| 31.75 Millimeter IPTCI NAPL 204 12 Pillow Block Bearings	2700 lbf	-10.2 mm	Imperial	15.083 mm
2.188 Inch \| 55.575 Millimeter x 2.811 Inch \| 71.4 Millimeter x 2.438 Inch \| 61.925 Millimeter IPTCI NAPL 211 35 L3 Pillow Block Bearings	8 Days	304 Stainless Steel	53	Bearings with Housin
0.5 Inch \| 12.7 Millimeter x 1.469 Inch \| 37.3 Millimeter x 1.063 Inch \| 27 Millimeter IPTCI NAPL 201 8 Pillow Block Bearings	Used for Light load	6	No	29100
0.75 Inch \| 19.05 Millimeter x 1.713 Inch \| 43.5 Millimeter x 1.313 Inch \| 33.35 Millimeter IPTCI NAPA 204 12 Pillow Block Bearings	Stainless Steel	6	15	6002