Pillow Block Bearings

Contact Now

Pillow blocks are supplied in a variety of configurations. Pressed steel pillow block bearings are also available for light-duty applications. Check out our selection of high quality pillow block bearings listed below. We are always updating and adding sizes and styles. So be sure to refer to this page often. A pillow block bearing consists of a mounting bracket (pillow block) that houses a bearing and is used in low-torque, light load applications. With this configuration, the pillow block is bolted to a foundation, securing it, while the shaft and the inner ring of the bearing are free to rotate.

A Pillow Block Bearing is a mounted anti-friction bearing that is contained within a solid cast iron, ductile iron or cast steel housing unit. Also referred to as a housed bearing unit, meaning they are self-contained, greased, sealed and ready for installation on the equipment.

Bearing Number	Bore Dia	Outer DIa	Width	Size
1.188 Inch \| 30.175 Millimeter x 1.5 Inch \| 38.1 Millimeter x 1.688 Inch \| 42.875 Millimeter BROWNING VPS-219 Pillow Block Bearings	Bearings with Housin	[Steel] Steel	35	Yes (with retaining
0.625 Inch \| 15.875 Millimeter x 1.079 Inch \| 27.4 Millimeter x 1.188 Inch \| 30.175 Millimeter NTN UCP-5/8 Pillow Block Bearings	67000	No	145	Grade 4
2 Inch \| 50.8 Millimeter x 2.469 Inch \| 62.7 Millimeter x 2.188 Inch \| 55.575 Millimeter IPTCI NAPL 210 32 L3 Pillow Block Bearings	M50	6 Days	6	No Surface Treatment
1.438 Inch \| 36.525 Millimeter x 2.012 Inch \| 51.1 Millimeter x 1.813 Inch \| 46.05 Millimeter IPTCI NAPL 207 23 Pillow Block Bearings	Bearing Steel	No	Tapered hole adapter	No
1.938 Inch \| 49.225 Millimeter x 2.469 Inch \| 62.7 Millimeter x 2.188 Inch \| 55.575 Millimeter IPTCI NAPL 210 31 Pillow Block Bearings	Metric (fine) Thread	304 Stainless Steel	2	Lock Nut
1.5 Inch \| 38.1 Millimeter x 2.217 Inch \| 56.3 Millimeter x 1.938 Inch \| 49.225 Millimeter IPTCI NAPL 208 24 Pillow Block Bearings	With Outer Ring	Steel	J	200
2 Inch \| 50.8 Millimeter x 2.469 Inch \| 62.7 Millimeter x 2.188 Inch \| 55.575 Millimeter IPTCI NAPL 210 32 Pillow Block Bearings	Single	DD (Contact Rubber S	8	Electroless Nickel P
1.75 Inch \| 44.45 Millimeter x 2.217 Inch \| 56.3 Millimeter x 2.063 Inch \| 52.4 Millimeter IPTCI NAPL 209 28 L3 Pillow Block Bearings	Thick Wall	Triple seals	Quote	J7
1.5 Inch \| 38.1 Millimeter x 2.217 Inch \| 56.3 Millimeter x 1.938 Inch \| 49.225 Millimeter IPTCI NAPL 208 24 L3 Pillow Block Bearings	14.3 mm	130.2 mm	4460 lbf	2.335 in
2 Inch \| 50.8 Millimeter x 2.811 Inch \| 71.4 Millimeter x 2.438 Inch \| 61.925 Millimeter IPTCI NAPL 211 32 L3 Pillow Block Bearings	34.54 mm	17244	7.49	-3.6 mm
1.938 Inch \| 49.225 Millimeter x 2.469 Inch \| 62.7 Millimeter x 2.188 Inch \| 55.575 Millimeter IPTCI NAPL 210 31 L3 Pillow Block Bearings	320 mm	Tr250x4	7.0 Kg	35 mm
1.25 Inch \| 31.75 Millimeter x 1.902 Inch \| 48.3 Millimeter x 1.563 Inch \| 39.7 Millimeter IPTCI NAPL 206 20 Pillow Block Bearings	Bearing Steel	96100	Tapered hole adapter	With steel plate cov