Angular Contact Ball Bearings

Contact Now

Angular Contact. Angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance. Double-row Conrad bearings can accommodate thrust in both directions.The load lines of the angular contact bearings back to back are separated from the bearing shaft.It can withstand axial loads acting in both directions, but the load in each direction can only be absorbed by one bearing. Back-to-back mounted bearings provide a relatively rigid bearing configuration and can withstand overturning moments.

 

 

 

 

Angular-contact ball bearings are similar to deep-groove ball bearings except that the line of action of the load acting through the contacts between balls and raceways forms an angle with the bearing axis. The bearings are therefore particularly suitable for carrying combined (axial and radial) loads.Single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable.

 

 


 

1.969 Inch | 50 Millimeter x 3.543 Inch | 90 Millimeter x 1.189 Inch | 30.2 Millimeter SKF 5210MF Angular Contact Ball Bearings

18 1.969 Inch | 50 Millimeter x 3.543 Inch | 90 Millimeter x 1.189 Inch | 30.2 Millimeter
18 mm BK3518

1.772 Inch | 45 Millimeter x 3.346 Inch | 85 Millimeter x 1.189 Inch | 30.2 Millimeter SKF 5209CG Angular Contact Ball Bearings

12 mm 68 mm
13,6 mm 1.772 Inch | 45 Millimeter x 3.346 Inch | 85 Millimeter x 1.189 Inch | 30.2 Millimeter

1.772 Inch | 45 Millimeter x 3.346 Inch | 85 Millimeter x 1.189 Inch | 30.2 Millimeter SKF 5209MG Angular Contact Ball Bearings

NTN 14,000 mm
14,000 1.772 Inch | 45 Millimeter x 3.346 Inch | 85 Millimeter x 1.189 Inch | 30.2 Millimeter
1/14