Insert Bearings Cylindrical OD

Contact Now

Insert bearing with narrow inner ring and two set screws. Cylindrical OD. This type bearing is self-aligning for the standard load capacity.The ER Series Insert Bearings have an inner ring that extends on both sides of the bearing to provide extra shaft support and a cylindrical OD. ER Series Insert Bearings are available in both 52100 Chrome Steel and 440C Stainless Steel. Chrome Steel Insert Bearings are harder than Stainless Steel and more durable in demanding applications.

 

 


The CSA Cylindrical OD Light Duty Narrow Inner Ring Set Screw Insert Bearing is factory lubricated with Chevron SRI#2 AW (anti-wear) grease. The insert contains 30-40% grease fill by volume. The CSA insert is factory sealed after lubrication and is considered Lubed-for Life.Insert bearings are also available in free spinning design and a black oxide finish upon request. They are most commonly produced with a spherical OD to allow for misalignment, but are also available with a cylindrical OD.

 

 

 

 

23,8125 mm x 52 mm x 34,92 mm TIMKEN 1015KRR Insert Bearings Cylindrical OD

No Cover 6
Pillow Type Cast Iron

22,225 mm x 52 mm x 34,92 mm TIMKEN 1014KRR Insert Bearings Cylindrical OD

6 Bearing unit
No Oil Supply Type

22,225 mm x 52 mm x 34,92 mm TIMKEN 1014KLL Insert Bearings Cylindrical OD

1.47 kg 11.5 Nm
42.9 mm 15 mm

19.05 mm x 47 mm x 34,13 mm TIMKEN 1012KLL Insert Bearings Cylindrical OD

200 °C 2.09
72.4 kN 203 mm

17,4625 mm x 40 mm x 27,78 mm TIMKEN 1011KLL Insert Bearings Cylindrical OD

Flanged Pilot Type 6704
Clear Anodize Bearings with Housin

19.05 mm x 47 mm x 34,13 mm TIMKEN 1012KL Insert Bearings Cylindrical OD

124 mm -20 °C
FLE205- 7.88 kN

15,875 mm x 40 mm x 27,78 mm TIMKEN 1010KRR Insert Bearings Cylindrical OD

90.49 mm 0.0
Ball Bearings B00308

12,7 mm x 40 mm x 27,78 mm TIMKEN 1008KRR Insert Bearings Cylindrical OD

Deep Groove Ball Bea 1045 Carbon Steel
Flanged Pilot Type [Steel] Steel

49,2125 mm x 90 mm x 49,21 mm TIMKEN 1115KLL Insert Bearings Cylindrical OD

19 Yes (with retaining
Single Bearings with Housin
1/17